Mini LifeJacket 3 with any other Altec Lansing Bluetooth speaker that also has the. You can find manuals, software and FAQ's at the website. Can't find what. Using the Mini Life Jacket 3 Bluetooth Speaker. Music on your packing list with the Altec Lansing iMW478 Mini LifeJacket 3 Bluetooth Speaker. Altec lansing passive subwoofer SW8. Is there any way to use the subwoofer by itself. I would like to use my Altec Lansing Mdl. I would like to find a user or service manual for. Do my Altec lansing FMW speakers require 9 volt.
Student-Contributed Wiki
An awesome student from our education program made this wiki. It is not managed by iFixit staff.
Vni fonts for windows. This troubleshooting page will help you diagnose problems with the Altec Lansing Mini Lifejacket 2, identified by model number IMW477.
Device won't connect via Bluetooth
The speaker will not connect to any devices through bluetooth.
![]() Audio source is not bluetooth compatible
Make sure the hardware and software are working properly by making sure they connect when prompted. If the audio source says that it is not compatible then turn the device off in order to reset the bluetooth on the receiving device.
Speaker is not in discoverable mode
Make sure that the speaker is in discoverable mode, denoted by the blinking blue light on the front of the device.
Device is out of range
Make sure the speaker is within 30 feet of your bluetooth device when attempting to connect.
Speaker is paired but connection is failing
If your speaker was successfully paired but the connection is failing, make sure that the speaker is within 30 feet of your bluetooth device and no large objects or walls are obstructing it. Try to unpair the devices, then reconnect them.
Faulty bluetooth antenna
If the device seems to be functioning normally but refuses to pair with other devices, the bluetooth antenna may not be receiving a signal. In this case, you may wish to follow our circuit board replacement guide.
Device won’t charge/turn on
The speaker will not charge or turn on.
Faulty power cable/charging port
Check if the speaker is charging when you plug it through the charging port, denoted by a steady red light located at the center of the speaker. If the speaker is not charging there may be a problem with the charging port or the power cable. Try a different power source or a different cable. If the problem persists, consider replacing the charging port using our back panel replacement guide.
Faulty battery
If the device appears to be charging but won’t turn on, the battery may be dead. To replace the battery, follow our battery replacement guide.
Device emits strange sounds
The speaker emits buzzing, distortion, or hissing sounds.
Audio Disruptions
A possible reason for the device emitting weird sounds could be because the volume is too high. If that is the case, you are hearing an audio pop which occurs when the sound is too high. Adjust the volume in this case. Another possibility is that the audio itself is faulty. Check the audio quality on another device to make sure it is alright.
Signal Disruption
The wireless range of the device is 30 feet. To avoid audio disruptions, place the speaker within the range of the device it is connected to. If it emits distorted sounds such as static or fuzz, make sure that there is no large object in between the speaker and the device it is connected to.
Speaker is faulty
If the device continues to emit strange sounds, check the signal through both bluetooth and the auxiliary cable. If both are working properly and the problem still exists, then the speaker may be faulty and needs to be replaced. In this case follow the link to below to check out our speaker replacement guide.
Device loses charge quickly
The speaker’s battery won’t hold charge for the advertised 10 hours.
Faulty Battery
To check if your device has a faulty battery unplug it and see if it stays charged for a prolonged period of time. If the device does not stay charged then you may have a faulty battery. To replace the battery, follow our battery replacement guide.
Overcharging
When the device is fully charged make sure to unplug it from the charging source. The battery’s lifespan could be shortened if overcharged multiple times.
Audio won’t play when device is turned on
The speaker is powered on, but won’t play audio.
Volume isn’t turned up or device is muted
Make sure your audio source is not muted and its volume is up. Press the + button on top of the speaker to increase its volume.
Speaker isn’t connected over bluetooth
Check to make sure your bluetooth device is turned on and is discoverable. A blinking blue light on the front of the speaker means it is ready to make a connection. A steady blue light means the speaker is paired. Make sure the speaker isn’t already connected to a different device.
Auxiliary cable connection is faulty
If the speaker won’t play audio through the 3.5mm auxiliary port, the cable may be faulty. First, test the speaker’s connection through bluetooth, then through the auxiliary port. If the problem is only present in the auxiliary port, make sure that both ends of the cable are properly connected. If possible, test the connection with a different 3.5mm cable. If a new cable does not fix the issue, the auxiliary port itself may be defective.
Speaker is faulty
If the issues stated above do not help, then the fault may be with the speaker. Symptoms of a faulty speaker may be very quiet or muffled audio, or none at all. In that case, the speaker will have to be replaced. You can do this by following our speaker replacement guide.
How to Update Device Drivers Quickly & Easily
Tech Tip: Updating drivers manually requires some computer skills and patience. A faster and easier option is to use the Driver Update Utility for Altec Lansing to scan your system for free. The utility tells you which specific drivers are out-of-date for all of your devices.
Step 1 - Download Your Driver
To get the latest driver, including Windows 10 drivers, you can choose from a list of most popular Altec Lansing downloads. Click the download button next to the matching model name. After you complete your download, move on to Step 2.
If your driver is not listed and you know the model name or number of your Altec Lansing device, you can use it to search our driver archive for your Altec Lansing device model. Simply type the model name and/or number into the search box and click the Search button. You may see different versions in the results. Choose the best match for your PC and operating system.
If you don’t know the model name or number, you can start to narrow your search down by choosing which category of Altec Lansing device you have (such as Printer, Scanner, Video, Network, etc.). Start by selecting the correct category from our list of Altec Lansing Device Drivers by Category.
Need more help finding the right driver? You can request a driver and we will find it for you. We employ a team from around the world. They add hundreds of new drivers to our site every day.
Tech Tip: If you are having trouble deciding which is the right driver, try the Driver Update Utility for Altec Lansing. It is a software utility that will find the right driver for you - automatically.
Step 2 - Install Your Driver
After you download your new driver, then you have to install it. To install a driver in Windows, you will need to use a built-in utility called Device Manager. It allows you to see all of the devices recognized by your system, and the drivers associated with them.
How to Open Device Manager
How to Install drivers using Device ManagerAltec Lansing Manuals- In Pdf
In most cases, you will need to reboot your computer in order for the driver update to take effect.
Altec Lansing Subwoofer Manual
Tech Tip: Driver downloads and updates come in a variety of file formats with different file extensions. For example, you may have downloaded an EXE, INF, ZIP, or SYS file. Each file type has a slighty different installation procedure to follow.
If you are having trouble installing your driver, you should use the Driver Update Utility for Altec Lansing. It is a software utility that automatically finds, downloads and installs the right driver for your system. You can even backup your drivers before making any changes, and revert back in case there were any problems.
Try it now to safely update all of your drivers in just a few clicks. Once you download and run the utility, it will scan for out-of-date or missing drivers:
Altec Lansing Manuals Pdf Ash100
When the scan is complete, the driver update utility will display a results page showing which drivers are missing or out-of-date. You can update individual drivers, or all of the necessary drivers with one click.
For more help, visit our Driver Support Page for step-by-step videos on how to install drivers for every file type.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |